Per the post below I know that SSLv3 will not be supported in the near future. I am looking for the actual date when it will no longer be supported ? Everything I find on the Microsoft website states in the near future ( OP was October 2014).
https://technet.microsoft.com/en-us/library/security/3009008.aspx
Hello..
I'm in a bit of a dilemma with security and compatibility being at odds with each other. In order to mitigate the growing list of security problems with TLSv1, I need to disable version 1 on our server (I know how to do this, so this is not a server issue). The problem is, IE 9 and 10 do not support TLSv1.1 or TLSv1.2 by default. These can be turned on manually in Internet Options/Advanced/Security.
And there's the problem: it has to be enabled manually. Asking users to go through this process in order to use our sites will most likely end up in a lost sale. And if a customer disables something that should not be disabled in the security settings, that can lead to more problems for them.
Where's the middle solution here? Most of our traffic is on IE 10. Disabling TLSv1 will shut those customers out. Does anyone know if there's an update around the corner that might enable v1.1 and 1.2 by default?
Thank you in advance.
Marc
After we upgraded to IE 9 users started getting messages "Are you sure you want to leave this page" on certain web pages"
Can it be disabled and would there be any repercussions
I don't quite believe this, but the CEO here is having a very odd issue on his personal PC. Running IE 11, he has a 100 or so favourites filed on his favourites bar, and occasionally/randomly some of the links are reset to point to nothing... He has showed me this on several occasions, different links, sometimes in sub folders etc. I go through and repoint them to the sites they are supposed to be showing, and a week or two later a its happened to a different couple of links...
I have searched and found nothing... does anyone have a bright ideas?
Thank you
Hello guys and gals.
On all of our company computers, when any user close the browser, need it to clear cache.
I know how to do this manually from options or set it in gpedit.msc .
I need to deploy a script to all computers to make this change in local GP or registery.
I am looking for a vbs script to do this change.
anybody have any clue?
Hi,
I'm a website owner that allows my users to upload large music files to my site. I've noticed the uploads never work using IE. Is there a way to fix this? I know that Users can use Firefox on Windows and Safari & Firefox on OSX but IE always rejects the upload to my site. This has nothing to do with FTP, this is a system on the website where large music files (up to 50MB) are uploaded by members. If anyone knows how I can fix this problem it would be much appreciated. It's not a server issue as the uploads work in other browsers, so I assume it's a setting in IE.
My IE version is 11.0.9600
I'm technically inclined but when it comes to Browser settings or workflows I'm a novice, so if you have an answer on how I can fix this, it'd be much appreciated. Please go step by step as well.
-ivanTW
Dr. Technical Any sufficiently advanced technology is indistinguishable from magic. -- Arthur C. Clarke
hi
i know this relevant for IE >5 ,
but does any one know about a combo than can be styled and used in IE 5?
appreciate your help ,
Thanks
After the distribution of the latest windows update on Dec 2014 we started to face irregular behavior with our Citrix ICA Client V12 which is used to connect to our online applications. The web application suddenly crash and windows provides an error message as below. The event viewer shows the below log.
We suspect that it was duo to Windows update, we have tried this fix (https://support.microsoft.com/kb/3025390) but with no luck.
Any help is appreciated.
Faulting application name: WFICA32.EXE, version: 9.200.44376.0, time stamp: 0x4457db21
Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521ea91c
Exception code: 0xc0000005
Fault offset: 0x00056b0d
Faulting process id: 0x10d4
Faulting application start time: 0x01d019e9afafc4b1
Faulting application path: C:\PROGRA~1\Citrix\ICACLI~1\WFICA32.EXE
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: f6c843ce-85dc-11e4-b1c7-d4bed9e4153f
Microsoft in their infinite wisdom has decided that Compatibility View is to be treated as Browsing History and therefore cleared on closure of the current Window. Wonderful stuff! We deal with lots of sites that are developed for IE7 such as Banks and Financial organizations etc and this has really become a royal pain in the nether regions for IT staff. Even though we have applied a GPO, IE does not retain the list of sites. Therefore we have to explain to users about how to set the compatibility view, and believe me users do not retain the information.
Anyone else come across this wonderful experience?
Anyone know of a way around this other than using Firefox?
Dear sir,
Whenever i cilck internet expoler. it is showing that one error .
That error is:
The application was unable to start correctly (0*c0000005).Click ok to close the application.
kindly say that how way to solve the error ..as soon as ..
Regards,
S.dharmaraj
my website is NOT accessible with Internet Explorer when browser options have only SSLv2 and TLS1.1 enabled, we have support for these securities and also on other browsers its working fine.
Need Help/Suggestions as earliest.
Hi
I have some virtual servers with Windows 2008 R2 standard where on one of them I am unable to upgrade from IE9 to IE11
With Windows Update I get following error: 9C59
In Event log I get following:
Installation Failure: Windows failed to install the following update with error 0x80070643: Internet Explorer 11 for Windows Server 2008 R2 for x64-based Systems.
I have tryed to install from a command prompt with the options /update-no but I get the same failure
A hint would be nice :-)
Best Regards
John B
Yesterday out of the blue some old pages from my favorites list reappeared. I deleted these in the past and now they just showed up. When I right click on them to delete them or go to organize favorites to delete them, they delete for a few seconds, but then reappear. I try again and again, but they just keep coming back. The "favorites bar" in my favorites list does the same thing. I have also gone to users/profile/favorites to try and delete them and they just come back.
I've run multiple scans with my antivirus software and spybot software, but it didn't fix it.
Anyone know how to fix this or know what the problem could be? I am not a tech guy, just an average joe, but can get around windows decently.
Thanks for your help.
I am trying to deploy Internet Explorer 11 in Dutch to deploy. Everything i try it fails on the machines that have the older Windows 7 installation.
Because the machines are needing updates i run wsus offline on such a machine and download all the updates nessecairy. After installing all updates with the updateinstaller of WSUS offline, Windows SP1 and all other updates are installed.
Then try again to install IE11 (made with IEAK11 or also one that is not created with IEAK) but installation fails. All the Prerequisites are available in the MSI i use to install including KB2834140.
The error where ie10 main log is keep coming is: error downloading prerequisite file KB2834140 0x800c005 2148270085
But the file is included in the IEAK version and the machines are updated!
The only way i can get IE11 installed is to update thru Windows Update but that is not an option. WSUS offline should get all the updates?
freddie
In IE11 there is a strange behavior of firing a keydown event.
There is a form with two input fields:
<form><inputclass="usernameField"type="text"></input><br><inputclass="passwordField"type="password"></input><br></form>and there are the following handlers (jQuery 1.11.0):
$(document).ready(function(){
$('.usernameField').keydown(function(event){
console.log('usernameField keydown');});
$('.usernameField').keyup(function(event){
console.log('usernameField keyup');});
$('.passwordField').keydown(function(event){
console.log('passwordField keydown');});
$('.passwordField').keyup(function(event){
console.log('passwordField keyup');});});1) Let's reproduce the issue with the username field
2) Now let's do the same with password field
The same issue can be reproduced without jQuery:
<script>function keyIsDownOnUsername(event){
console.log('keyIsDown on username');}function keyIsUpOnUsername(event){
console.log('keyIsUp on username');}function keyIsDownOnPassword(event){
console.log('keyIsDown on password');}function keyIsUpOnPassword(event){
console.log('keyIsUp on password');}</script><form><inputonkeydown="keyIsDownOnUsername(event)"onkeyup="keyIsUpOnUsername(event)"type="text"></input><br><inputonkeydown="keyIsDownOnPassword(event)"onkeyup="keyIsUpOnPassword(event)"type="password"></input><br></form>IMHO it's a bug and it should be fixed.
P.S. JFYI: keyup event (for Ctrl key) is not fired in all of these cases.
Hello
I work as part of a IT team within a organization that has 200+ Windows 8.1 devices, recently we have been experiencing a problem when downloading files using Internet Explorer 11.
You click the file to download (word document,PDF etc) and you get the yellow bar at the bottom asking you to open save etc but when you select any of the options nothing happens and this is becoming increasingly more common.
I cant believe we are the only people to have this issue but i have searched and cant find any answers.
I hope somebody can help us.
Thanks,
When using (and only when using) SharePoint 2013 I have a client who's IE9 is crashing repeatedly over and over. You can use SharePoint for about 30 seconds and then ie crashes and restarts automatically.
Here is the event from the event viewer:
Log Name: ApplicationAnyone know why?
I recently updated from IE 9 to IE 11 on a Dell Latitude E5520. I run Windows 7 x64 SP1. When I put IE 11 on the computer I instantly had issues trying to get IE to open. It would crash instantly. I fixed that issue by going into the tools and the advanced tab and checking "use software rendering instead of GPU rendering." Now if I try to print any page from IE I get the following error and I was wondering if there is something I should be looking for.
Problem Event Name: BEX
Application Name: IEXPLORE.EXE
Application Version: 11.0.9600.17496
Application Timestamp: 546fddcc
Fault Module Name: StackHash_8834
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 7513c9f5
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 8834
Additional Information 2: 88347c38059dd49ba7e8edcce4d45658
Additional Information 3: ceba
Additional Information 4: ceba416043cad6d1c2bebb7c80b4855d
