Hi All,
I have Window Server 2008 R2 Operating System, which is in workgroup, there is no Group Policy configured, I have also put off IE Enhance Security Configuration.
Still i am unable to make Security Level for Internet zone to low. It is terminal Server and for testing purpose, sometime User need to make it low. Please let me know how can we do the same.
Thanks & Regards,
Param
www.paramgupta.blogspot.com
Hi,
I cant update IE 8 in windows 7 professional 32 bit operating Systems.kindly suggest me the way out to update SP1 for windows 7 professional .
Thank You ,
I cannot use https://username:password@xxx.xxx.xxx.xxx anymore how can I change IE default behavior, tried editing
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Internet Explorer\MAIN\FeatureControl\FEATURE_HTTP_USERNAME_PASSWORD_DISABLE]
[HKEY_CURRENT_COMPUTER\SOFTWARE\Microsoft\Internet Explorer\MAIN\FeatureControl\FEATURE_HTTP_USERNAME_PASSWORD_DISABLE]
with no luck
IE 10 will not install in Windows 7 64 bit SP1
I go past the prompt that says "restarting programs". Then the installation fails. The updates are all up to the minute.
Please help me install IE 10
Here is the log. Same error in three tries. It gives the IE10 Failed to install message.
00:00.000: Started: 2013/02/27 (Y/M/D) 16:34:02.472 (local)
00:00.016: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
00:00.016: Command line: "C:\Users\Pats Workstation\Downloads\IE10-Windows6.1-x64-en-us.exe"
00:00.031: INFO: Setup installer for Internet Explorer: 10.0.9200.16521
00:00.047: INFO: Previous version of Internet Explorer: 9.0.8112.16464
00:00.047: INFO: Checking if iexplore.exe's current version is between 10.0.8100.0...
00:00.062: INFO: ...and 10.1.0.0...
00:00.062: INFO: Maximum version on which to run IEAK branding is: 10.1.0.0...
00:00.062: INFO: iexplore.exe version check success. Install can proceed.
00:00.078: INFO: Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)
00:00.094: INFO: Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
00:00.109: INFO: Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
00:00.109: INFO: Trying to extract ID: 7006 (0) as "IE10-neutral.Extracted.cab"
00:00.499: INFO: Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
00:00.515: INFO: Extracted Spelling dictionary for en to C:\Windows\TEMP\IE1A275.tmp\Spelling_en.msu.
00:00.515: INFO: Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
00:00.530: INFO: Extracted Hyphenation dictionary for en to C:\Windows\TEMP\IE1A275.tmp\Hyphenation_en.msu.
00:00.546: INFO: Trying to extract ID: 7128 (1033) as "IE10-support.cab"
00:01.388: INFO: PauseOrResumeAUThread: Successfully paused Automatic Updates.
01:01.371: INFO: The no reboot policy and supplemental files failed to download correctly. Default installation files will be used. Wait return value was 0x00000102 (258) [The wait operation timed out. ]
01:01.402: INFO: Launched program to check hardware: "C:\Windows\TEMP\IE1A275.tmp\IE10-SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\Windows\TEMP\IE1A275.tmp\HardwareBlockingList.xml"
01:01.496: INFO: Graphics Device Information: NVIDIA Quadro 600
01:01.496: INFO: Hardware support check succeeded. Installation will continue.
01:01.496: INFO: Windows 7 operating system detected.
01:01.511: INFO: Service pack major: 1
01:01.511: INFO: Service pack minor: 0
01:01.511: INFO: Service pack name: Service Pack 1
01:01.527: INFO: Version Check for (KB2670838) of C:\Windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll: 6.2.9200.16492 >= 6.2.9200.16492 (True)
01:01.527: INFO: Version Check for (KB2639308) of C:\Windows\System32\Ntoskrnl.exe: 6.1.7601.18044 >= 6.1.7601.17727 (True)
01:01.542: INFO: Version Check for (KB2533623) of C:\Windows\System32\api-ms-win-security-base-l1-1-0.dll: 6.1.7601.18015 >= 6.1.7601.17617 (True)
01:01.558: INFO: Version Check for (KB2731771) of C:\Windows\System32\kernel32.dll: 6.1.7601.18015 >= 6.1.7601.17932 (True)
01:01.558: INFO: Checking for correct version of C:\Windows\Fonts\segoeui.ttf.
01:01.574: INFO: Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.18010 >= 6.1.7601.18010 (True)
01:03.414: INFO: Waiting for 0 prerequisite downloads.
01:03.414: INFO: The neutral pack was not successfully downloaded from the internet. Installation will continue using the extracted package.
01:03.446: INFO: No reboot logic message NrApiStart(0), lParam=0x031b1838 returned 0x00000000.
01:04.085: INFO: No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.
01:04.085: INFO: No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
01:04.101: INFO: Installing with the extracted package. C:\Windows\TEMP\IE1A275.tmp\IE10-neutral.Extracted.cab
01:04.116: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1A275.tmp\IE10-neutral.Extracted.cab /quiet /norestart
01:18.796: INFO: Process exit code 0x000036B3 (14003) [The referenced assembly is not installed on your system. ]
01:18.796: ERROR: Neutral package installation failed (exit code = 0x000036b3 (14003)).
01:18.796: INFO: No reboot logic message NrApiInstallDone(7), lParam=0x00009c59 returned 0x00000000.
01:18.812: INFO: No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
01:18.812: INFO: No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
01:18.812: INFO: Waiting for Active Setup to complete.
01:18.812: INFO: Waiting for Active Setup to complete. ({89820200-ECBD-11cf-8B85-00AA005B4383})
01:23.819: INFO: Waiting for Active Setup to complete. ({89820200-ECBD-11cf-8B85-00AA005B4383})
01:28.827: INFO: Waiting for Active Setup to complete. ({89820200-ECBD-11cf-8B85-00AA005B4383})
01:33.850: INFO: Waiting for Active Setup to complete. ({89820200-ECBD-11cf-8B85-00AA005B4383})
01:38.873: INFO: Waiting for Active Setup to complete. ({89820200-ECBD-11cf-8B85-00AA005B4383})
01:43.912: INFO: PauseOrResumeAUThread: Successfully resumed Automatic Updates.
02:36.578: INFO: Link clicked, opening URL in new window:'http://go.microsoft.com/fwlink/?LinkId=272316'
06:31.594: INFO: Setup exit code: 0x00009C59 (40025) - The neutral cab failed to install.
06:31.625: INFO: Cleaning up temporary files in: C:\Windows\TEMP\IE1A275.tmp
06:31.656: INFO: Unable to remove directory C:\Windows\TEMP\IE1A275.tmp, marking for deletion on reboot.
06:31.672: INFO: Released Internet Explorer Installer Mutex
We have our own internal program running here at our company that only we have access to inside the network via the web browser. Recently we upgraded from IE8 and IE9 and noticed that now when we click links within our program to open .txt files we are now prompted asking if we want to open or save the document. I've noticed in IE9 the option to enable or disable "Automatic prompting for file downloads" has disappeared. I understand the reason behind this as to protect from malicious code or programs executing in the background without users knowledge. My question is does anyone know of a way to enable this for example on trusted sites only? I don't want to open it up full blown, but would be great if I could do this on a site by site basis. Since this is an internal application we access via the browser it has really thrown a wrench in the work environment for our users, even though it is just clicking one extra button.
P.S. I'm aware of the right-clicking the file you recently downloaded and unchecking the option to automatically open those file types, but that's only an option for specific file types, such as .zip files. Its not an option for .txt files.
I've configured the Enterprise Mode site list as directed in the following article
http://msdn.microsoft.com/en-us/library/dn640696.aspx
and set up the gpo to point to my site. I've confirmed in my site's logs that the xml file is accessible.
However, it isn't working; none of the sites are launching in enterprise mode. I notice that the CurrentVersion key in HKCU\Software\Microsoft\Internet Explorer\Main\EnterpriseMode has remained at 1 and is not updating. I'm assuming that is the problem, but I can't figure out why it won't update.
Any advice?
How to disable this option “Do you want to open or save this file?” i have referred many posts it all points to the same solution in this article but never works.
http://9to5it.com/internet-explorer-disable-do-you-want-to-open-or-save-this-file-prompt/
Please suggest.
Regards,
Maqsood
Maqsood Mohammed Senior Systems Engineer MCITP-Enterprise Admin & ITILv3 Foundation Certified
Hello
I have searched all over for the past few days trying to find a solution for IE where I can display text in a table vertically starting bottom to top (or -90 degrees from normal). All other browsers seem to be able to do this but IE cannot. Can
someone point me to an easy or any solution for this?
Andy
I think these began after the last set of updates.
I Randomly get different types of script errors when navigating to a new page. It is NOT reproducible, as subsequent attempts to the same web pages do not always get an error, or if it does - it's not the same error.
Whether I click the 'continue running scripts' YES or NO, may cause a different error, or it may not.. Clicking past however many errors does NOT seem to affect the page which eventually displays.
At times, it seems to disappear for a few pages, then it's back.
I downloaded a replacement I.E. 11, but it tells me that a 'newer' one exists and will not replace it.
I'm willing to try a replacement, but how do I clear the existing I.E.? Or what updates can I remove that may correct this and/or allow me to replace this annoying 'cry wolf' copy?
Thanks,
Bob
I have a quite complex javascript produced by GWT and it works great in all browser (including IE10) but in IE11 I'm facing performance issues.
Activating profiler I discovered how the most consuming code is...(in order from the most consuming)
clientWidth,offsetHeight, and similar methods with impressing values:
clientWidth 32 seconds (32806ms) for just 60 calls offsetHeight 29seconds for 181 calls
it seems to me the cause of my performance issues localised in IE11 (consider the execution in IE10 is around 2seconds for the whole code) and beside naturally I can start optimise reducing the number of call (if possible) i would like to understand if there's anything wrong with methods i'm using or something else Anyone knows what's so wrong in IE11?
I checked that the browser works in standard mode and document mode is 11 but just to give a term of compare: clientWidth in the same code in document mode=10 (using IE11 and forcing it through development tools or using directly a IE10) it's 15ms... a difference of 2000times
Hi,
Is it possible to lock down IE to only use a single website? I'm setting up a PC to be used a kiosk machine in a public area to point at the customer's public website and the customer does not want facebook, twitter, porno.com or any other site to be available to the public.
So far, I've tried:
1. Using a proxy of 127.0.0.1 and adding an exception for the customer's website.
2. Using content advisor to only allow a single site. Oddly enough the "Always Allow website\webpage" still asks for a password prompt when used.
3. Using firewall rules to block traffic to all sites by configuring an allow rule for http/https to my customer's site IP and then using a deny rule for all other outbound http/s traffic - just didn't work.
The problem with 1 & 2 is that the customer's website is large (around 35 pages) and there are links on many of the pages to facebook, youtube, twitter, google analytics and a few other. The customer wants their youtube content to be viewable, but not watch other videos - I can't see a way of doing it, but thought I'd ask....
Thanks
IT Support/Everything
Hello,
We changed to Internet Explorer 10 some time ago. This problem has been persistent from the day one. The problem is that after every Windows Update some users get their Local Area Network (LAN) Settings (Control Panel --> Internet Options --> Connections-TAB --> LAN settings) totally blanked. We are using the automatic configuration script so this is the only setting I'm really interested about. There is no single windows update that effects this. Every Windows Update that touches the Internet Explorer will erase the options.
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings]"AutoConfigURL"="http://proxy.server.address:1812/pac_files/proxy.pac"
I always have the "menu bar" displayed by default in IE9. Sometimes, several times a day, the "menu bar" will duplicate itself and display twice on the browser screen. If I turn the "menu bar" off and back on the problem goes away for a while but will return. I am just wondering if this is happening to anybody else or is it just me? Here is an example of what the screen looks like with two menu bars. Oh, the top "menu bar" does not work.
Hello everyone,
I need to package an automated reset of IE11, because one intranet site need this reset, i have found the manually procedure but not the automated script ?
Is it avalaible ?
Thkx
To manually install both the x86 and x64 updates go to
https://java.com/en/download/manual.jsp
We have detected you may be viewing this page in a 64-bit browser. If you use 32-bit and 64-bit browsers interchangeably, you will need to install both 32-bit and 64-bit Java in order to have the Java plug-in for both browsers.
Rob^_^
We have a company network and are having trouble access the site gis.Utah.gov from within the network.
Here are the steps that I have taken for troubleshooting:
We have tried this with IE, Firefox and Chrome with no luck.
If anyone has any input regarding what else I could look at to resolve this issue, I would be grateful.
I am working for a client, and they have recently rolled out Windows 7 64-bit machines, with IE 10 on them (IE 11 is not yet an option due to incompatibility with Citrix Receiver 3.4 PNAgent and Mcafee VSE).
The proxy in use here is a Clearswift web gateway appliance (linux) using NTLM authentication to the proxy. This then forwards requests to our ISA 2006 server.
We have two sites, Site A and Site B. Each site has it own subnet, and it's own Clearswift web gateway.
We also have 4 remote locations, with their own subnet, but not separate site as far as AD sites and services are concerned. All these remote location's subnets fall into Site A. We have leased WAN lines to interconnect all these locations, with Bluecoat WAN accelerator at the remote locations.
Internet works fine at either site A or B. The problem arises at ALL the remote locations ONLY WHEN using the Windows 7 machines with IE 10. Users always get a popup box asking for authentication to the Clearswift proxy. This does not occur at Site A or Site B. And it does NOT occur on the old Windows XP machines with IE 8 at the remote locations. And it also DOES NOT occur with firefox at the remote locations. I have tested with IE11 and the problem still exists.
So in short, if the following happen:
1. Windows 7 PC with IE10/11
2. Remote location, NOT site A or site B
3.Attempt to browse internet via IE10, using Clearswift web gateway as proxy
You will always get the authentication pop up box, unless you:
1. Use firefox
2. Use the ISA 2006 as proxy instead, skipping the Clearswift web gateway
The Clearswift web gateway is in use due to company policy that wishes to block inappropriate material. And firefox is not deployed to local machines again as part of company policy, none of which I am either allowed to change or even paid to.
I have opened a support call with Clearswift but I doubt I will get anywhere.
I can confirm that the Clearswift web gateway (which is just a linux appliance running on vmware) uses NTLM authentication.
The only thing I have found is this:
https://support.microsoft.com/kb/976918?wa=wsignin1.0
Which I have tried to no avail.
The only other variable that has not been accounted for is the Bluecoat SG210 WAN Accelerator at each of these remote locations. The two remaining tests for me to do are:
1. Bypass the WAN accelerator
2. Turn off the need for authentication on the clearswift web gateway
I would be keen to know if anyone else has had similar issues.
I'm trying to troubleshoot a webapp, which uses LocalStorage to store a user's username (an email address) between (sessions) logins. The used method conforms to HTML5 specs: http://www.w3schools.com/html/html5_webstorage.asp
The problem I'm facing is that on a number of workstations in the same hospital organisation this doesn't work.
Is there any GPO settings that could affect a user's local storage, and preventing the webapp to store the last username? Also, any resources documenting these specific GPO settings would be useful.
Thanks,
M
Hi,
I have written following code in ajax.
This is a javascript function called on onchange event of a button.
This code works fine in firefox and chrome but does not work in IE8.0+
the values don't get displayed.
plz suggest me if there is any change.
thnx in advance.
Hello!
When i start IE 11 it begins to work from strange site (in my case http://hptds5.ru)
I can't understand from what place IE gave the site. The site is absent in any options.
How i can exclude this site from my IE?
Please help.
Thank you.
