Hi,

I recently updated an image to IE 10 and in doing so I now can only apply Favorites using the Administrators Toolkit. Before you could put them in Default User/Favorites and they would import into IE 10 but no longer. For some reason the Default user favorite info doesn't transfer to the appropriate folder.

My problem is that while I've made the branding msi I can't run it silently. I get the message below and must click Install and then OK when it is finished.

This is clearly not a silent install. I shouldn't have to agree to any license terms--this is for administrators to use for deployment.

Please help and/or fix.

I've run it with /qn, /quiet, and /passive and all get the same thing. I've run it by itself and as an application in Deployment Toolkit.

Thanks.

EDIT: I may have found a possible solution.

IE10-Setup-Branding.exe has a quiet switch set for /Q which you can see if you run it with /?

This still doesn't explain the usual msiexec quiet switches not working--which is a pretty standard deployment tool for IT admins.

I have seen lots of posts but no answers.

I have Windows 8 Pro RTM installed from MSDN. I am running IE10 and I go to my Linksys router and get the usual certificate error. In all previous versions of IE, you could just click continue and move forward. IE10 does not all this, please let me know where this setting is so I can use IE10, I hope I am not forced to use Chrome. Also there is no option to run as IE9 for some reason.

Hello,

We are running IE 8.  We have set the HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main “TabProcGrowth” to 1 (dword:00000001).  However, we have noticed that sometimes, even with this setting, there are more than 2 iexplore.exe processes running in the task bar.  IE8 usually freezes and we have issues running certain apps.

What could cause more than two iexplore.exe sessions if the TabProcGrowth is set to 1?  Could some other registry setting or group policy be overriding this setting? 

Thanks,

JIrwin.

Recently I attempted to install IE 10 on my windows 7 SP1 x64 machine.

Initial setup did not complete and error'd out with error code 9c59 when using windows update.

My system now thinks that IE 10 is installed but it is not.

Looking in "Turn Windows Features on or off" it shows "Internet Explorer 10"

Looking in "View installed updates"  it shows "Windows Internet Explorer 9"

Looking in the CBS.log I see the following entries when I try to re-install IE 10

2013-04-23 10:51:29, Info                  CBS    Failed to find file: amd64_microsoft-windows-ie-ieshims_31bf3856ad364e35_10.2.9200.16521_none_c566c98a0aaca096\IEShims.dll [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2013-04-23 10:51:29, Info                  CBS    Failed to gather all required files. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2013-04-23 10:51:29, Info                  CBS    Failed to gather all missing files for package: Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~amd64~~10.2.9200.16521 [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2013-04-23 10:51:29, Info                  CSI    0000000e2013/4/23:14:51:29.537 CSI Transaction @0x1d03d40 destroyed
2013-04-23 10:51:29, Error                 CBS    Failed to pre- stage package: Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~amd64~~10.2.9200.16521 [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2013-04-23 10:51:29, Info                  CBS    Perf: Stage chain complete.
2013-04-23 10:51:29, Info                  CBS    Failed to stage execution chain. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2013-04-23 10:51:29, Error                 CBS    Failed to process single phase execution. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2013-04-23 10:51:29, Info                  CBS    WER: Generating failure report for package: Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~amd64~~10.2.9200.16521, status: 0x80070002, failure source: Stage, start state: Resolved, target state: Installed, client id: DISM Package Manager Provider
2013-04-23 10:51:29, Info                  CBS    Failed to query DisableWerReporting flag.  Assuming not set... [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2013-04-23 10:51:29, Info                  CBS    Failed to add %windir%\winsxs\pending.xml to WER report because it is missing.  Continuing without it...
2013-04-23 10:51:29, Info                  CBS    Failed to add %windir%\winsxs\pending.xml.bad to WER report because it is missing.  Continuing without it...
2013-04-23 10:51:29, Info                  CBS    Reboot mark refs: 0
2013-04-23 10:51:29, Info                  CBS    SQM: Reporting package change for package: Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~amd64~~10.2.9200.16521, current: Resolved, pending: Default, start: Resolved, applicable: Installed, target: Installed, limit: Installed, hotpatch status: StillGoing, status: 0x0, failure source: Stage, reboot required: False, client id: DISM Package Manager Provider, initiated offline: False, execution sequence: 518, first merged sequence: 518
2013-04-23 10:51:29, Info                  CBS    SQM: Upload requested for report: PackageChangeBegin_Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~amd64~~10.2.9200.16521, session id: 142859, sample type: Standard
2013-04-23 10:51:29, Info                  CBS    SQM: Ignoring upload request because the sample type is not enabled: Standard
2013-04-23 10:51:29, Info                  CBS    SQM: Reporting package change completion for package: Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~amd64~~10.2.9200.16521, current: Resolved, original: Resolved, target: Installed, status: 0x80070002, failure source: Stage, failure details: "(null)", client id: DISM Package Manager Provider, initiated offline: False, execution sequence: 518, first merged sequence: 518
2013-04-23 10:51:29, Info                  CBS    SQM: stage time performance datapoint is invalid. [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
2013-04-23 10:51:29, Info                  CBS    SQM: execute time performance datapoint is invalid. [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
2013-04-23 10:51:29, Info                  CBS    SQM: Upload requested for report: PackageChangeEnd_Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~amd64~~10.2.9200.16521, session id: 142862, sample type: Standard
2013-04-23 10:51:29, Info                  CBS    SQM: Ignoring upload request because the sample type is not enabled: Standard
2013-04-23 10:51:29, Info                  CBS    Enabling LKG boot option
2013-04-23 10:51:29, Info                  CBS    Exec: End: nested restore point - complete.
2013-04-23 10:51:29, Info                  CBS    Restored system sleep block state: 0x80000000
2013-04-23 10:51:29, Info                  CBS    Exec: Processing complete.  Session: 30294066_6530911, Package: Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~amd64~~10.2.9200.16521 [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2013-04-23 10:51:29, Error                 CBS    Failed to perform operation.  [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2013-04-23 10:51:29, Info                  CBS    Session: 30294066_6530911 finalized. Reboot required: no [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2013-04-23 10:51:29, Info                  CBS    Session: 30294066_165631531 initialized by client DISM Package Manager Provider.

If I try to re-install IE 9 it says "Setup can't continue because a more recent version of Internet Explorer is installed on your computur.

If I try to install IE 10 via Windows Updates, it fails with error 9c59, and the errors above are in the cbs.log.

If I try to install IE 10 using setup  "IE10-Windows6.1-x64-en-us.exe", installation fails with same cbs.log entries.

Any help would be greatly appreciated, so I can complete the setup of IE 10.

Using any Help in the IE11 Dev Toolbar just sends me to the MS Home page (Canada).  Is thereanywhere useful I could go in this context instead?

 
TIA

Robert Aldwinckle
---

Hi there

as IE10 still doesn't have a Click2Play option I'd like to request this feature to be added in the next Version or even with a Patch! ( Win8.1 ? )

You all know that Java and Flash are a pain in the a**. But in most environments they still are required.

It would help Admins a lot if youd just add this feature. If the Browser wont Autoplay every stupid AddOn, Security would increase, and Terminal-servers could get a breath :)

o/

Ben

\o/

Is anyone else having problems clicking on the browse button after being UAC'd when attempting to download a file from the Catalog?

http://catalog.update.microsoft.com/v7/site/DownloadInformation.aspx

In addition, even if UAC works, I get a cryptic proxy prompt asking me to enter my credentials to the "proxy-server."

I can't be the only one experience this. This is with Internet Explorer 8.x.

Hello,

I'm preparing Win 8.1 preview image with MDT 2013 beta and I have a problem making Internet Explorer 11 pre-approve Browser Helper Objects.

I'm installing MS Office 2013, Adobe Acrobat XI, Java 1.6 in the State Restore state (so after the Windows first boots up).

When I start IE 11 for the first time on every user I have a popup to enable the following addons:

Java(tm) Plug-In 2 SSV Helper - ClassID {DBC80044-A445-435B-BC74-9C25C1C588A9}

Microsoft SkyDrive Pro Browser Helper - ClassID {D0498E0A-45B7-42AE-A9AA-ABA463DBD3BF}

Office Document Cache Handler - ClassID {B4F3A835-0E21-4959-BA22-42B3008E02FF}

Lync Browser Helper - ClassID {31D09BA0-12F5-4CCE-BE8A-2923E76605DA}

Adobe PDF Link Helper - ClassID {18DF081C-E8AD-4283-A596-FA578C2EBDC3}

I've tried to add those ClassIDs to Win8.1 unattend.xml into PreApprovedAddons, InstalledBrowserExtensions, InstalledBHOLIst in Specialize phase but without any luck.

I also tried to add them using GPO "Add-on list" in Administrative Templates for Machine and User - still no luck

I've added them manualy under HKCU / HKLM \Software\Microsoft\Windows\CurrentVersion\Ext\PreApproved

as well as HKCU / HKLM \Software\Microsoft\Internet Explorer\Approved Extensions

no luck

All of those methods doesn't work and I'm still getting "Several add-ons are ready for use." prompt each time IE is started on a new profile.

Can you please share any ideas about it?

Best Regards,

Bartek

Ok, I’am domain admin and recently, I have created User IE 10 GPP (User Configuration > Preferences > Control Panel Settings > Internet Settings (Internet Explorer 10)) and general IE GPO. There is small number of workstations with IE 10 installed, and there I have one big problem: IE 10 open target="_blank" links in new window instead of new tab!

In User GPP for IE 10 (xml: max="99.0.0.0" min="10.0.0.0"), which is created under windows server 2012, I have this settings:

https://skydrive.live.com/redir?resid=8D315521CDDFD66F!1130 (1.png)

No GPO is defined for tab behavior.

That GPP is successfully applied to the workstations with IE 10.

https://skydrive.live.com/redir?resid=8D315521CDDFD66F!1130 (2.png)

But, then the problem starts:

if user IS member local or domain admin group, IE 10 open links with target="_blank" in new tab.

If user IS NOT member of local or domain admin group, every target="_blank" is open in new window. Even CTRL + mouse click open normal links in new window, instead of new tab. Same as if I right click link and select "open in new tab" - new windows again!

I did reset IE settings (Internet Options > Advanced > Reset) couple of times on many workstations, it didnt help.

Please help me, that problem is so irritating, and (non admin) users are angry, and after so many hours spend trying to solve the problem, nothing worked out.

Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

I have already posted the question to Microsoft's IE support site at,

forum--> ie9-windows_7 --> automatic-logon-with-current-username-and-password

and I was asked to post the question in this tech form. Below is the question again,

Does anyone know why IE during Single Sign on session(IE8 and IE9) sends a authorization header and no request data during AJAX request even though session is valid?

What happens due to this our backend WCF service doesn't receive request parameters and the entire single sign on session fails, so user has to redo the entire login process.

Chrome and Firefox both doesn't have this problem.

Below is the detail of what I am doing,

IE 10 will not install in Windows 7 64 bit SP1

I go past the prompt that says "restarting programs".  Then the installation fails.  The updates are all up to the minute.

Please help me install IE 10

Here is the log.  Same error in three tries.  It gives the IE10 Failed to install message.

00:00.000: Started: 2013/02/27 (Y/M/D) 16:34:02.472 (local)
00:00.016: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
00:00.016: Command line: "C:\Users\Pats Workstation\Downloads\IE10-Windows6.1-x64-en-us.exe"
00:00.031: INFO:    Setup installer for Internet Explorer: 10.0.9200.16521
00:00.047: INFO:    Previous version of Internet Explorer: 9.0.8112.16464
00:00.047: INFO:    Checking if iexplore.exe's current version is between 10.0.8100.0...
00:00.062: INFO:    ...and 10.1.0.0...
00:00.062: INFO:    Maximum version on which to run IEAK branding is: 10.1.0.0...
00:00.062: INFO:    iexplore.exe version check success. Install can proceed.
00:00.078: INFO:    Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)
00:00.094: INFO:    Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
00:00.109: INFO:    Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
00:00.109: INFO:    Trying to extract ID: 7006 (0) as "IE10-neutral.Extracted.cab"
00:00.499: INFO:    Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
00:00.515: INFO:    Extracted Spelling dictionary for en to C:\Windows\TEMP\IE1A275.tmp\Spelling_en.msu.
00:00.515: INFO:    Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
00:00.530: INFO:    Extracted Hyphenation dictionary for en to C:\Windows\TEMP\IE1A275.tmp\Hyphenation_en.msu.
00:00.546: INFO:    Trying to extract ID: 7128 (1033) as "IE10-support.cab"
00:01.388: INFO:    PauseOrResumeAUThread: Successfully paused Automatic Updates.
01:01.371: INFO:    The no reboot policy and supplemental files failed to download correctly. Default installation files will be used. Wait return value was 0x00000102 (258) [The wait operation timed out. ]
01:01.402: INFO:    Launched program to check hardware: "C:\Windows\TEMP\IE1A275.tmp\IE10-SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\Windows\TEMP\IE1A275.tmp\HardwareBlockingList.xml"
01:01.496: INFO:    Graphics Device Information: NVIDIA Quadro 600
01:01.496: INFO:    Hardware support check succeeded. Installation will continue.
01:01.496: INFO:    Windows 7 operating system detected.
01:01.511: INFO:    Service pack major: 1
01:01.511: INFO:    Service pack minor: 0
01:01.511: INFO:    Service pack name:  Service Pack 1
01:01.527: INFO:    Version Check for (KB2670838) of C:\Windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll: 6.2.9200.16492 >= 6.2.9200.16492 (True)
01:01.527: INFO:    Version Check for (KB2639308) of C:\Windows\System32\Ntoskrnl.exe: 6.1.7601.18044 >= 6.1.7601.17727 (True)
01:01.542: INFO:    Version Check for (KB2533623) of C:\Windows\System32\api-ms-win-security-base-l1-1-0.dll: 6.1.7601.18015 >= 6.1.7601.17617 (True)
01:01.558: INFO:    Version Check for (KB2731771) of C:\Windows\System32\kernel32.dll: 6.1.7601.18015 >= 6.1.7601.17932 (True)
01:01.558: INFO:    Checking for correct version of C:\Windows\Fonts\segoeui.ttf.
01:01.574: INFO:    Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.18010 >= 6.1.7601.18010 (True)
01:03.414: INFO:    Waiting for 0 prerequisite downloads.
01:03.414: INFO:    The neutral pack was not successfully downloaded from the internet. Installation will continue using the extracted package.
01:03.446: INFO:    No reboot logic message NrApiStart(0), lParam=0x031b1838 returned 0x00000000.
01:04.085: INFO:    No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.
01:04.085: INFO:    No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
01:04.101: INFO:    Installing with the extracted package. C:\Windows\TEMP\IE1A275.tmp\IE10-neutral.Extracted.cab
01:04.116: INFO:    Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1A275.tmp\IE10-neutral.Extracted.cab /quiet /norestart
01:18.796: INFO:    Process exit code 0x000036B3 (14003) [The referenced assembly is not installed on your system. ]
01:18.796: ERROR:   Neutral package installation failed (exit code = 0x000036b3 (14003)).
01:18.796: INFO:    No reboot logic message NrApiInstallDone(7), lParam=0x00009c59 returned 0x00000000.
01:18.812: INFO:    No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
01:18.812: INFO:    No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
01:18.812: INFO:    Waiting for Active Setup to complete.
01:18.812: INFO:    Waiting for Active Setup to complete. ({89820200-ECBD-11cf-8B85-00AA005B4383})
01:23.819: INFO:    Waiting for Active Setup to complete. ({89820200-ECBD-11cf-8B85-00AA005B4383})
01:28.827: INFO:    Waiting for Active Setup to complete. ({89820200-ECBD-11cf-8B85-00AA005B4383})
01:33.850: INFO:    Waiting for Active Setup to complete. ({89820200-ECBD-11cf-8B85-00AA005B4383})
01:38.873: INFO:    Waiting for Active Setup to complete. ({89820200-ECBD-11cf-8B85-00AA005B4383})
01:43.912: INFO:    PauseOrResumeAUThread: Successfully resumed Automatic Updates.
02:36.578: INFO:    Link clicked, opening URL in new window:'http://go.microsoft.com/fwlink/?LinkId=272316'
06:31.594: INFO:    Setup exit code: 0x00009C59 (40025) - The neutral cab failed to install.
06:31.625: INFO:    Cleaning up temporary files in: C:\Windows\TEMP\IE1A275.tmp
06:31.656: INFO:    Unable to remove directory C:\Windows\TEMP\IE1A275.tmp, marking for deletion on reboot.
06:31.672: INFO:    Released Internet Explorer Installer Mutex

I have multiple computers on my domain that will not download files or attachments in IE8 and 9.  It says "<filename> contained a virus and was deleted".  Everything will download fine in Chrome and Firefox and these files do not contain viruses - it happens on every file I try to download, or every attachment in all emails.

Is there a setting in IE that is causing this - it is happening on about 30 computers out of 100 in our domain - all with the same group policy settings for IE.

We are clueless and frustrated to figure this out and ready to just roll out Chrome to everybody to fix the problem.  Any help would be appreciated.

Just upgraded from IE9

Since the upgrade every new tab or page generates a script error:

Line: 1

Error: Unable to get property 'style' of undefined or null reference

I have :

reset internet explorer, disabled all addins, run as administrator

Any other ideas?

CarolChi

I am planning to move my organisation to Internet Explorer 8. We are on IE7 at the moment We are planning to go to Windows 7 on IE9 but an urgent requirement for IE8 has come up in the interim.

I am reading Microsoft Internet Explorer 8 Deployment Guide and there is a large section on the IEAK8 option but as we do not customize the web page to take advantage of branding etc I am using SCCM to deploy the package and GPOs to set the customisation options.

Is this strategy I have OK am I missing something about IEAK8?

Please advise